Understanding the Importance of Jets in Your Softub
The jets in your Softub serve several crucial functions. When activated, they facilitate the circulation of water through the pump and filtration system, ensuring that any added chemicals are evenly distributed throughout the water for optimal balance. More importantly, the jets provide a soothing experience, offering relaxation and hydrotherapy through a gentle massage. After enjoying your time in the Softub, you may encounter a situation where the jets won’t turn off. Let’s explore the reasons behind this.
The jets can be deactivated by pressing the Jets button on the control panel, provided that the water has reached the designated temperature. If the water temperature drops more than 2 degrees below the set level while the jets are running, the heater light will activate, causing the jets to continue running until the desired temperature is restored, at which point they will automatically shut off.
When Will the Jets Turn Off?
Automatic Shut Off
Your Softub’s jets will automatically turn off after 15 minutes of continuous operation, provided that the water has reached the set temperature. If you plan to remain in the Softub for longer than 15 minutes, simply press the Jets button again to reactivate the jets for an additional 15-minute session. This automatic shut-off feature is designed to prevent the pump from running unnecessarily and is also a perfect duration for adding chemicals. If you’ve recently introduced chlorine or other balancing products to the water, activate the jets and let them run without concern for manually turning them off; they will do so automatically.
Manual Shut Off
Once you’ve finished your session in the Softub and exited the water, you can press the Jets button on the control panel to turn off the jets. However, this will not be effective if the water temperature is still in the process of heating. In such cases, the jets will remain on until the water reaches the desired temperature.
Heating Mode: Jets Unable to Turn Off
This scenario often occurs once you step into your Softub. The cover retains warmth, keeping the water cozy without the need for extended heating. However, when you remove the cover, activate the jets, and open the air valve, the water temperature may start to drop. This decrease can trigger the heating function, which activates if the water temperature falls below the set point. Consequently, the water will need to reheat to the designated temperature. Typically, the heating rate is between 1 to 3 degrees per hour, depending on your Softub’s model, external weather conditions, and size. Once the water reaches the set temperature, both the pump and jets will turn off. To deactivate the jets during heating, adjust the temperature on the control panel to a lower setting. Once you set it to a temperature below the current water temperature, the heater will turn off, allowing you to then turn off the jets.
How to Turn Off the Air to the Jets
The air valve can be adjusted to control the flow of air through the return jets, providing the bubbly water and therapeutic effects you desire while enjoying your Softub experience. To turn off the air, simply rotate the valve to the appropriate position on the control panel. The jets will continue to operate, but without air flowing through the returns, offering a more tranquil experience while still circulating the water.
When Should You Deactivate the Air Valve?
During Heating
For optimal heating efficiency, it’s advisable to turn off the air valve while the Softub is heating, as the air can cool the water. While you are using the Softub, you can enjoy the air feature even during the heating process. The water will continue to warm while in use; however, once you are done, it’s best to turn the air valve off. This simple action can significantly reduce the time needed to achieve the desired water temperature.
After Adding Chemicals
While it’s a matter of personal preference, it’s generally unnecessary to have the air on full blast after adding chemicals to the water. Ensure the jets are activated and let them run for a minimum of 15 minutes (until the auto shut-off activates) to adequately mix and dissolve the chemicals in the water.
For a Calm Soaking Experience
While many users immediately turn on the jets and air for a vigorous experience, there are times when a serene soak is preferred. This could be after spending some time in the tub when you might want to reduce the air or even turn it off entirely, or perhaps when you first enter. The choice is yours—enjoy your Softub experience in a manner that suits your mood, whether calm or bubbly!
When Do the Jets Automatically Activate?
The Softub is equipped with features that not only allow the jets to turn off automatically after a designated period but also have the capability to turn on when not in use for an extended time. If you frequently use your Softub, you may rarely encounter a situation where the jets activate without your command.
Filtration Mode
There is a filter light indicator on Softub units that some users mistakenly believe signals when the filter requires changing. In reality, this light illuminates every 12 hours if the heater hasn’t been adjusted or activated during use. When the filtration light activates, the system will run for 15 minutes while checking the current water temperature. If the temperature is found to be more than 2 degrees cooler than the set point, the heater will engage until the temperature is restored. This built-in functionality efficiently ensures that your water remains circulated and temperature-checked twice each day. However, if you use the Softub frequently, it may not trigger the automatic filtration mode.
Conclusion
The Softub is designed with excellent features that make it user-friendly and automated, allowing you to enjoy your experience without much hassle. If you find yourself unable to turn off the jets, rest assured that they will eventually enter sleep mode once the water reaches your preferred settings. Just remember to cover the tub, turn off the air valve, and let the Softub take care of the rest.
Bir yanıt yazın